VMS CA Glue Filler AX10

Mixed with this fine powder CA glue turns into fast-curing putty you can use for instant gap-filling much like the standard putty but without the usual wait.

Whenever you run out of putty or the standard type is too slow you can mix fast-curing putty using your CA glue and this filler powder.

CA putty dries to solid filling that is easily sanded down. You can also apply this filling in layers and make combined fillings with other putties if necessary.

Recommended to mix with VMS Flexy SLOW CA Glue for greater open time.

A handy 50 ml dropper bottle with a fine tip ensures easy application of powder to the mix and will last you very long!

Use:
Dispense a portion of CA glue on a piece of styrene, glass, or a metal sheet, never on cardboard, as it will absorb your glue.
Spray some powder onto the glue and mix it with a toothpick till you reach the consistency of putty.
Quickly apply the putty and even it with a hobby knife to minimise the residue around the gap.
Once the filling is dry sand it with 600-grade paper and follow with 1000-grade.

Combine with: CA Glue

Recommended techniques: mix using a toothpick, apply with a blade

Available volumes: 12-13 grams in a 50 ml dropper bottle (half full due to filling process)

88ml spray can