RX-USB Converter 2ch

Play computer games with your own R/C Transmitter

"RX-USB Converter" converts the R/C servo signals from R/C receiver to USB signals. You can enjoy functions of your own transmitter (exponential, dual rate, ABS...) on computer games and simulators. Real R/C transmitter enables fine and accurate operation that was not possible with ordinal game controllers.

Hardware Requirements IBM Compatible PC with USB port
OS Requirement Windows 98 (SE), ME, 2000 Professional, XP
*Even if your computer satisfies these requirements, it is not guaranteed that the converter will function on it.*The converter will not work on Windows 95, NT4.0
Operable Software All Games and Simulators that work with common USB game controller on PC.
Interface USB 1.1
Device Driver Not required (driver in OS is used)
Controller Type 2-axix 1-button game controller
Power Source Not required. The power to this unit and receiver is provided through the USB port
Size 56 x 45 x 20mm (Case Size)
Operable Receiver 27MHz to 75MHz AM, FM, PCM/PPM receiver with more than 2 Channels. (Excludes Futaba PCM receiver)
Note * It is not guaranteed that the converter will function on every receiver. The converter might become instable with some receiver.
* This converter does not work with Futaba PCM / HRS receiver. If you use a Futaba transmitter, change the transmitter mode to PPM and use a FM-PPM receiver.
* This converter does not work with Futaba PCM receiver. If you use a Futaba transmitter, change the transmitter mode to PPM and use a FM Receiver.
* It is not required to use a receiver from the same manufacturer as transmitters' because this converter is used with transmitter and receiver close to each other. Even ordinary receiver with relatively poor reception can be used.
* This converter works with high speed response type transmitter/receiver other than Futaba. However, if using different manufacture's receiver as transmitter, it is recommended to switch signal mode to normal PPM.
* If signal reception is poor, connecting transmitter and receiver with direct servo controller cable is recommended.