Radio Link 9DS 2.4GHz 9-channel Receiver

Radiolink R9DS, 2.4G 9 channel receiver, DSSS and FHSS spread spectrum working simultaneously, use with Radiolink transmitters AT9, AT9S and AT10.

Radiolink R9DS, 2.4G 10 channel receiver, DSSS and FHSS spread spectrum working simultaneously, use with Radiolink transmitters AT9, AT9S and AT10.

SBUS and PWM also work at the same time!

Two signal Modes:

PWM signal output mode：red LED indicates PWM signal output, 9 channels in total.
SBUS signal output mode: blue/purple LED indicates SBUS signal output, 10 channels in total. SBUS and PWM signal can work at the same time with SBUS signal output mode. CH9 output SBUS signal, the original CH1 to CH4 output CH7 to CH10 PWM signal at the same time.

Changing SBUS and PWM Mode ：

Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS. The red LED indicates the normal PWM and blue/purple LED indicates SBUS signal.

Binding:

Place the transmitter and the receiver close to each other, within 1 meter.
Turn on the transmitter, then power on the R9DS.
There is a black button on the R9DS, use a thin stick press the button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on!

Channels: 10 (9 channels using PWM signal and 10 channels using SBUS and PWM simultaneously.)
Working voltage: 4.8-10V
Working current: 38-45mA（input voltage: 5V）
Size: 43*24*15 MM
Telemetry Integration using PRM-01 or PRM-02.
4096 precision, 0.25us per section.