Kinetic 1/48 Mirage 2000 with dual GBU-12/22 kit 48120

The Mirage 2000 arose from the French Air Force requirement for a Future Combat Aircraft (ACF) to replace its aging Mirage III. With the defeat of the Mirage F.1 by the General Dynamics F-16 for the NATO tactical fighter requirement, Dassault developed two designs, the twin-engined Super Mirage and a single-engined design based on the Mirage III. The French Air Force turned down the Super Mirage as too costly and development of the single-engined variant ensued and dubbed Mirage 2000. Development of the Mirage 2000 proceeded very quickly given that the airframe was essentially a Mirage III that was modified to accommodate the SNECMA M53 Super Atar engine and much of the airframe volume used for older avionics and traditional flight control systems were recycled to accommodate advanced fly-by-wire systems as well as state-of-the-art avionics. First flight of the Mirage 2000 was 27 months after program start. In contrast, the P-51 Mustang took only four months, the F-16 about two years, and the X-35 (F-35 prototype) took about four years.

The Mirage 2000 was originally developed as a single-seat fighter-interceptor to replace the Mirage III, with the two-seat Mirage 2000B developed as the trainer variant. The Mirage 2000B design was further modified for sustained low-level flight and delivery capability of the nuclear ASMP missile to replace the ageing Mirage IV, this variant was designated as Mirage 2000N. The Mirage 2000D was a further development based on the Mirage 2000N to provide precision strike capability with conventional weapons. Like many air forces around the world, the Mirage 2000D makes use of the second crewman to provide that extra pair of eyes as well as manage the weapons and guidance systems while the pilot deals with sustained low-altitude flight in a hostile environment.

The Kinetic 1/48 Dassault Mirage 2000D with Dual GBU-12/22 from the plastic aircraft model kits range accurately recreates the real life French jet aircraft. This model requires paint and glue to complete.

Kinetic Models has reissued their 1/48 Mirage 2000B/D/N kit from 10 years ago and includes the same sprues as before plus one new tree that contains a pair of GBU-12 and a pair of GBU-22 laser-guided bombs (LGB). The kit is melded in light gray styrene and presented on nine parts trees, plus a single tree of clear parts. While the design of the kit is modular to support the three different aircraft types, you can see from the fuselage and wings that these differences are not significant enough to cause assembly challenges. The instructions clearly show you which parts are needed in each step to render the variant you are interested in building, however these are the same instructions as the original release, so they don't provide assembly instructions for the LGBs or what pylons these should be suspended from. The painting instructions were updated and show painting and stencilling for the LGBs and now all of the previous GSI paint call-outs have been replaced with Ammo paints.

Among the features of the kit:

• Nicely detailed cockpits
• Separately moulded tires and wheel hubs for easy painting
• Positionable flight control surfaces (except rudder)
• Three different tails
• Positionable canopies
• Parts to render the Mirage 2000B, 2000D, or 2000N

• Among the weapons and stores:

  • 2 x Magic 1
  • 2 x Magic 2
  • 1 x centreline tank
  • 2 x wing tanks
  • 2 x AS-30L
  • ATLIS targeting pod
  • 2 x GBU-12
  • 2 x GBU-22