HOBBYWING XERUN V10 13.5T G4R BLACK MOTOR

HOBBYWING XERUN V10 13.5T G4R BLACK MOTOR

Features

• Excellent performance, specially designed for 1/10 or 1/12 STOCK racing.
• Designed to pair with HOBBYWING XR10 Stock Spec G2 ESC.
• The innovative outer diameter structure of a fully exposed stator core maximizes the heat dissipation area, the rear end of the motor is designed in a way to further improve heat dissipation.
• Dual sensor interface is designed to meet various wiring/layout requirements.
• The special copper bar is customized and the spacing of copper bar is widened, which greatly facilitates the operation of soldering wire.
• The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
• The use of high-performance stator core, 220°C high-temperature-resistant enamelled wire, high precision high strength bearings and copper solder tabs with super current endurance guarantees outstanding performance and super durability.

Specifications

Scale: 1/10th
Brushed/Brushless: BL
Sensored/Sensorless: SD
Pole Count: 2
KV Rating: 4100KV
LiPo Cells: 1-2S LIPO
No-load Current(A): 5.4A
Max Power Output(W): 297W
Current at Max Output(A): 70.7A
O.D.(mm): 35.8
Length (mm): 51.3
Shaft Diameter (mm): 3.175
Weight (g): 158g
Front Bearing: D9 x D4 x T4
Rear Bearing: D8 x D3 x T4
ESC: XeRun XR10 G2S
Vehicles: 1/12 - 1/10 Stock

SPECIFICATIONS<br />T: 13.5<br />KV: 3950<br />LiPo's: 2-3<br />(Ω): 0.021Ω<br />No-load Current (A): 4.5A<br />Max. Output Power (W): 322<br />Current @Max. Output Power (A): 70<br />Stock Rotor: Φ7-12.5*25.2-HUS<br />Weight (g): 149<br /><br />RECOMMENDED GEAR RATIO<br />Stock Class: 13.5T<br />TC (Small track): 4.7 : 1<br />TC (large Track): 4.0 : 1<br />TC 1/12th: 55mm<br />2WD Off-road: 7.6 : 1<br />4WD Off-road: 8.3 : 1<br /><br />CAUTIONS<br />To avoid short circuits, ensure that all wires and joints must be well insulated before connecting the motor to related devices.<br /><br />Never allow this product or other electronic components to come in contact with water, oil, fuel or other electro-conductive liquids. If it happens, stop the use of the product immediately and let it dry carefully.<br />Read through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.<br />Never apply full throttle if the pinion gear is not mounted on, because (under the no-load circumstances) high RPMs may get the motor damaged.<br />Connect all the devices carefully, you may not control the vehicle properly or encounter some unpredictable issues like damaged components if any poor connection exists.<br />To avoid possible damage (result from overheating) to the product, please control the soldering time within 5 seconds when soldering the motor wires (a soldering iron with the power of at least 60W is needed).<br />Stop immediate usage once the casing of the motor exceeds 100?/212? as a high temperature may damage the motor and cause the rotor to demagnetize. Hobbywing recommends activating the “Motor Thermal Protection” (of the ESC).