Multiplex FunnyCUB Indoor (1-00888)

The FunnyCUB of MULTIPLEX brings a bush atmosphere to the gyms and gardens of model enthusiasts. With its large wheels and cushioned landing gear, it can, like its big brother FunCub, take off and land virtually anywhere. It is also possible to lower both flaps for use as airbrakes, which further decreases flight speed and take-off distance. The FunnyCub is therefore a must for all fans of bush and indoor flying aircraft,
This EPP model is very robust in construction and will survive almost any piloting error. With the FunnyCub, it will be possible to pass almost every figure of aerobatics imaginable.

Kit Contents:
EPP fuselage, wings, tailplane and landing gear with color printing. Winged wings and fuselage in CFK, wheels. All the small plastic parts needed to assemble and connect the rods. Detailed record.

Motorization recommended:
# 1-01026: V2 'Extra 330 SC Indoor / FunnyCub' power set
including:
# 1-00018 ROXXY BL Engine Outrunner C27-13-1800kV
# 1-01050 ROXXY BL-Control 715 S-BEC Controller
# 1-01007 GWS EP-8x4 "HD Indoor Propeller
# 1-00026 'Shockflyer' propeller clamp

Recommended equipment:
# 112040 x4 Servo HS-40
# 55808 RX-5 light receiver M-LINK 2.4 GHz
# 1-00016 ROXXY EVO Battery LiPo 2 - 450B 30C with BID-Chip OR:
# 1-00017 ROXXY EVO Battery LiPo 3 - 350B 30C with BID-Chip

Technical data:
Material: EPP
Wingspan: 930mm
Length: 810mm
RC functions: direction, depth, fins x2, engine
Weight in flight: 180g
Autonomy: approx. 6mn with recommended battery
Roxxy LiPo 2S / 450 mAh (# 1-00016)