Castle Creations Phoenix-45 Brushless Electronic Speed Control - BAGGED

Castle Creations Phoenix-45 Brushless Electronic Speed Control - BAGGED - NO INSTRUCTIONS

This is the Phoenix 45 brushless electronic speed controller from Castle Creations! With a surge current of 60 amps, the Phoenix-45 is well suited for warmliners, small hotliners, and even some 40 size glow conversion projects. Matched up with Hacker B50 and C50 motors, medium and large AXI motors, or 36mm Feigao motors, the Phoenix-45 puts a lot of power at your fingertips, and all in a very light and compact package.

With the same programmable features of it's smaller cousins, the Phoenix-45 can be set for helicopter installations (including those with collective pitch) or airplanes. Additionally, for competition flyers the Phoenix-45 features an adjustable switching rate for optimum efficiency.

Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
Over-Current Protection - 5 settings
Brake Type - 5 settings
Throttle Range - fixed/self-adjusting/governor
Timing Advance - 3 choices
Cutoff Type - hard or soft
Switching Frequency - 3 choices

ll Castle Creations Phoenix electronic speed controls feature:

Battery Eliminator Circuit (BEC): eliminates receiver battery
Safe "Power On"
Microprocessor Controlled
Tough surface mount construction
Audible Arming Signal
Auto Motor cut-off with reset
Low torque "Soft Start": protects gear boxes and belt drives from shock
Smooth reverse exponential throttle
Self-calibrating endpoints: maximizes usable stick travel
Auto shut-down when signal is lost
Simple setup: no complicated switches or wiring

Volts w/ BEC: 12.6 max
Volts w/o BEC: 19.2 max
Lipo Cells w/BEC: 3S max
Lipo Cells w/o BEC: 4S max
NiCd or NiMh Cells w/ BEC: 12 max
NiCd or NiMh Cells w/o BEC: 16 max
Continuous: 45 amps
Switching Rate: Programmable (11, 22, or 41 khz)
Resistance: 0.0026 ohms
Brake: Yes
Reversible: Yes - change any two wires
Low Voltage Cut-off: Programmable
Size: 0.95 x 1.72 x 0.4
Weight (w/wires): 1 oz (30g)
Connector Type: Universal"