Bucks-Composites Wing Joining / Repair Kit with brush & Latex Gloves

Bucks-Composites Wing Joining / Repair Kit with brush & Latex Gloves

This kit is very useful for repairs to model Boats, Planes and Glider mouldings. Once the resin and hardener is mixed then put into a tray (larger area) to prevent heat build up, this will give you a longer pot life / working time (50 minutes). The cure time is 24 hours at room temp.

The Resin and Hardener is also Foam Friendly.

The kit contains:
Laminating Epoxy Resin and Hardener 150ml,
Glass Fibre Reinforcing Tape 100mm (4”) Wide / One Metre Long,
one resin spreader card,
two mixing pots,
two spatulas
a full set of instructions for joining