Bucks-Composites water based coating system

If covering a foam surface, sand the foam smooth then cut the woven glass fibre cloth to size and lay on the foam surface then wet out the cloth with the water based coating system with a Bucks coating brush then leave for 2 hours to dry before applying a further three coats allowing 2 hours drying time between coats.

Brushes and Tools can be washed off in warm soapy water. For surface finishing only.

Avoid contact with eyes and skin, wear suitable gloves and eye protection.

Suitable for use with lightweight glass cloth for covering model boats & model aircraft. Single part and doesn’t attack foams white, pink or blue.

Foam Friendly, single part no mixing required, dries hard, glossy & clear.

Self Levelling Properties and very long working time.

Not fuel proof.

Acrylic paint ok.

Cellulose paint not suitable.

Waterproof.

Makes a good ding resistance surface on models when used in conjunction with Glass Fibre Woven Cloth.

Full strength is in 4 weeks.

Low Odour & easy to use.

Shake bottle before use.