JR 35Mhz SPCM 7CH Auto Scan PLL-Synthesizer Receiver RS77S - SECOND HAND

JR 35Mhz SPCM 7CH Auto Scan PLL-Synthesizer Receiver RS77S

Dial up any frequency in the 35Mhz range instantly
You can set the frequency in the receiver by following these instructions:
Plug a battery into the RS77S receiver and turn power on.
Turn on the transmitter and place it 1 metre from the receiver.
Press and hold down the “SCAN” button on the end of the receiver for more than 2 seconds.
Release the “SCAN” button for 2-3 seconds, then press the “SCAN” button again for ½-1 second.
The LED will flash on and off quickly during the scanning process and once this process is completed the LED will stay solidly lit.
If the LED flashes slowly then there has been a problem with the scanning procedure and you should repeat the procedure after checking that the receiver battery has sufficient voltage and that there are not any other transmitters in the close vicinity of your receiver.