HSD 2m Cessna 182 Red (PNP 6S + Floats)

Key Features

Light and resilient 35 times EPO airframe.
Outstanding scale detailing.
Minimal assembly time.
Large 2000mm wingspan.
Clear glazed cabin windows.
Cockpit detail and pilot figure.
Equipped with MFC-2065 integrated control system.
Durable EPO float set with pre-installed water rudder and servo.
6S power system.
Scale three-bladed propeller.
Full scale LED navigation and landing light system.
Clip-lock two-piece wing.
Wing-mounted connector blocks for aileron, flap and light wiring.
Highly durable aviation grade aluminium main undercarriage.
Durable sprung nose leg.
8 to 10 minute flight times.

What's in the Box

1x Pre-painted and finished EPO fuselage moulding.
1x Pre-painted and finished EPO wing set.
1x Pre-painted and finished EPO tailplane set.
1x Pre-painted and finished EPO fin and rudder.
1x Pre-installed 5055-500KV brushless outrunner.
6x Pre-installed metal gear digital servos.
1x Pre-installed Hobbywing 80A brushless ESC.
1x Pre-fitted LED navigation light system.
1x Pre-installed Integrated control system (ICS).
1x Float and fxing set.
1x Comprehensive instruction manual.
1x Comprehensive ICS instruction manual.

Needed to Complete

1x 6-channel transmitter and receiver combo.
1x 6S 22.2V 5000 – 6000mAh LiPo with AS150 connector.
1x 2S 7.4V 2000 – 3000mAh LiPo with XT60 connector.

Wingspan 2000 mm (78.7 in)
Length 1586 mm (62.4 in)
Flying Weight 5kg (11 lb)(with 22.2v 5200mAh 45C battery)
Cruising speed 80～90 km/h
Flying time 8～10 mins
Wing area 56.1 dm2
Wing load 89.1 g/dm2
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level □Zero basis ■Beginner □Intermediate □Advanced
PNP Assembly difficulty ■☆10mins □★☆30mins □★★60mins
Suitable for ambient temperature 0℃～40℃
Radio System 6 channel (required & not included)
Control System MFC-2065
Motor 5055-KV500
ESC Hobbywing 80A
Propeller 14.5×7 Trefoil oar
Servos 7.4V 25g×4 Metal gear with 80mm lead (L/R Flaps & L/R ailerons forward)
7.4V 25g×2 Metal gear with 190mm lead (Elevator×1 & Rudder×1 forward)
Recommended Power Battery 22.2V，5000～6000 mAh，45C Li-Po with AS150 type plug(required & not included)
Recommended Receiver Battery 7.4V，2000～3000 mAh, Li-Po with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Pontoon Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/55.71×14.76×14.57 in
CG (Centre of Gravity) 96mm from the leading edge of the Main Wing
Landing Gears Front three-point all-metal fixed landing gear×3
Battery Charger LiPo battery charger (required & not included)