Arrows Tecnam 2010 PNP with Floats (1450mm) Trainer

Tecnam-2010 1450mm PNP - Overview Explore new heights with the Arrows 1450mm Tecnam-2010 Designed from the ground-up as a beginner-friendly aircraft, the Arrows Tecnam-2010 is easy to build and easy to fly. Easy to Build Thanks to the modular construction of the airframe, the aircraft is ready for flight with the installation of only a few screws. Remove the screws and the aircraft easily comes apart for transportation and storage. Easy to Fly Light wing loading and a high-lift airfoil design gives the aircraft highly predictable flight characteristics. With the pre-installed Vector system, the Tecnam-2010 is one of the most forgiving aircraft on the market, while retaining aerobatic performance for advanced pilots looking for a relaxing weekend flyer. The nose wheel and rudder are controlled by independent servos, allowing for easy ground handling. Power Power comes courtesy of a high-quality 3536-850kV motor and 30A ESC (Arrows recommends a 11.1V 2200mAh 25C flight battery). When paired with the highly efficient 11x7 propeller and proper throttle management, expect flight times of up to 15 minutes! Advanced Features Built using durable EPO material and equipped with rugged plastic wing struts, the Tecnam-2010 will stand up to a surprising amount of wear and tear. A latch-type battery cover makes changing batteries a painless experience. Whether you're a beginner or an advanced pilot, the Arrows 1450mm Tecnam-2010 is the perfect aircraft to have in you fleet!

What's in the Box
1x Factory assembled and decorated fuselage and fin.
1x Factory assembled and decorated 2-piece wing.
1x Factory assembled and decorated tailplane.
1x Pre-installed 3536 850KV motor.
1x Pre-installed 30A ESC with XT60 connector.
6x Pre-installed high quality 9g metal gear servos.
1x Pre-installed high quality 13g metal gear servo (nose wheel).
1x Undercarriage set with wheel spats.
1x Float and strut set with water rudder.
1x 2-blade 11 x 7 propeller and spinner.
1x Wing spar.
1x Screw and pushrod set.
1x Wing strut set.
1x Scale aerial set.
1x Comprehensive instruction manual.
Needed to Complete
1x 6-channel transmitter and receiver combo.
1x 3S 2200 to 3200mAh LiPo with XT60 connector.
1x 3S compatible LiPo balance charger.
"