MRW43 L.E.D Light Switch

Features

L.E.D’s are powered from the receiver battery pack.

The ON direction is selectable by the end user.

L.E.D indicator on the unit to show the on point.
Instructions

Plug the unit in to the channel you have chosen to switch the L.E.D’s and then wire up L.E.D’s you want to switch on and off. Up to a maximum of 4 L.E.D’s (see diagram below)
Operating the unit

First it is recommend that set the channel you are using to switch the L.E.D’s to 100% travel, once this is done

the L.E.D Light Switch will switches on around 75% of the travel channel you are using.
SWITCH DIRECTION

If you find the L.E.D Light Switch is operating in the wrong direction for the switch channel you are using and channel reverse is not available on your radio or you are operating it with another device on that channel via a “Y” lead that needs to operate in a particular direction.

Then press and hold the “+” key and switch your radio receiver on, this will reverse the action of the switch unit, carrying out the same operation will change it back again.
SAFETY

Please ensure that the set-up key cannot be pressed accidentally while the unit is in use.