Microaces STAGG Speedbird Micro Staggerwing Kit

What is Scrappee?

Based on the staggered biplane wing layout of the Beechcraft Model 17, the Scrappee STAGG is an easy to build, stable flying model kit, with a performance suitable for light wind days or indoor flying in most sports halls.

With the lower wing position forward of the top wing, the model provides a very different flying experience than the standard Scrappee Trainer and Scrappee Biplane kits. It also looks amazing in the air.

This particular kit is decked out in a civilian aviation style with the 'Speedbird' stripes along the port and starboard sides of the fuselage. The vibrant red livery and large, bold registration numbers make identification and orientation in the air much easier.

NOTE: To get your Scrappee in the air you will need an RC transmitter (compatible with one of the 4 types of receiver available) plus a suitable battery and charger. Please feel free to CONTACT US if you need some guidance!

Selecting the right receiver to complete your kit:

The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
DSM2/X Compat. S-FHSS Compat. FrSky D8 Compat. FrSky D16 Compat.
Scrappee Classic

Scrappee STAGG kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.

NOW INCLUDES Brushed Motor/Gearbox with standard prop shaft
GWS 4530 Prop and rubber prop adapter
SHEET PARTS 2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet
1mm printed & laser cut Depron flight surfaces sheet x 4
200 micron printed & laser cut polypropylene sheet
polyester sticker sheet


LOOSE PARTS 0.8mm laser cut plywood motor mount
Two 30mm Ø Sponge rubber tires + 3D printed hub assembly
Four 3mm & two 4mm Ø noedymium magnets
2mm Ø carbon fibre rod axle
pre-shaped piano wire elevator & rudder control rods

Airframe Sport
Controls Rudder, Elevator, Throttle
Length 330mm / 13
Wingspan 427mm / 16.8"
Wing Area 5.60 sq dm / 86.8 sq in.
Flying Weight. 44 - 48g/1.5 - 1.7oz
Wing Load ~8.2 g/sq.dm / 2.69 oz/sq.ft.
Required
Microaces AIO 5 Channel Receiver
Rec. Motor / G.Box*
Microaces Motor Gearbox with STANDARD prop shaft
Rec. Prop* GWS 4530
Skill Level - Build Beginner
Skill Level - Pilot Beginner
Tools required
Tools required Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers (NOT INCLUDED)
Rec. Adhesive Foam2Foam / Foam safe CA / Aliphatic glue (NOT INCLUDED)
"