Microaces Fokker D.VII Fokker OTTO Kit - Flown by Otto Baurose

To complete you will also need transmitter, Microaces AIO 5 Channel Receiver to match your Tx, battery and charger, adhesives etc.

Fokker D.VII Flown by Otto Baurose, Jasta 71. 1918

History in the making

Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. Although introduced in the later stages of WWI, the Fokker D.VII was a seriously formidable combat aircraft. Designed through the lessons of its predecessors it was comparitively stable, fast and maneuverable and was quickly liked by the pilots who flew it.

This Microaces kit is now supplied 'as standard' with the most suitable Microaces motor/gearbox and propeller combination for the model.

So to complete the kit for radio controlled flight, all you need is an All In One (AIO) Receiver that's compatible with your transmitter.
Selecting the right receiver to complete your kit:

The Microaces AIO 5CH micro receiver (NOT INCLUDED)is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
DSM2/X Compat. S-FHSS Compat. FrSky D8 Compat. FrSky D16 Compat.

'Bomb's away!' (NOT INCLUDED)



Kit Content

NOW INCLUDES Brushed Motor/Gearbox with standard prop shaft
GWS 4530 Prop and rubber prop adapter
SHEET PARTS 2mm laser cut Foam airframe sheet
1mm printed & laser cut Foam fuselage sheet
1mm printed & laser cut Foam flight surfaces sheet
200 micron printed & laser cut polypropylene sheet
polyester sticker sheet

LOOSE PARTS 0.8mm laser cut plywood motor mount
Two 30mm Ø neoprene rubber tires
Six 3mm Ø noedymium magnets
200mm x 5mm Ø plastic tube
1mm x 0.4mm carbon fibre strip
1mm Ø carbon fibre rod
pre-shaped piano wire elevator & rudder control rods

Specification
Airframe Scale
Controls Rudder, Elevator, Throttle
Length 295mm / 11.5
Wingspan 368mm / 14.5"
Wing Area 3.95 sq dm / 61 sq in.
Flying Weight. 38 - 42g/1.3 - 1.5oz
Wing Load ~9.3 g/sq.dm / 3.0 oz/sq.ft.
Recommended
Receiver Microaces AIO 5 Channel Receiver (Not Included)
Rec. Motor / G.Box* Microaces Motor Gearbox with STANDARD prop shaft (Included)
Rec. Prop* GWS 4530 (Included)
Skill Level - Build Intermediate
Skill Level - Pilot Intermediate
Tools required Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers - not included
Adhesive Deluxe Materials Foam2Foam / Aliphatic glue-not included
"