Microaces Bristol F.2b S.No. B1162 Brisfit kit

To complete you will also need transmitter, Microaces AIO 5 Channel Receiver to match your Tx, battery and charger, adhesives etc.

Flown by Ernest John Elton 1918

Microaces Bristol F.2b kit sees a substantial kit revision that incorporates a rib-less wing design for a more scale appearance, plus a number of new scale features and options to make it even more appealing to the scale enthusiast.

The Microaces Bristol F2b kit can arguably reclaim the title of 'the most detailed microscale aircraft of the Microaces range'. Now with strut mounted pitot tube and a 3D printed rotating fuel pressure pump prop mounted on the undercarriage included in the kit.

History in the making
Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. Despite being a two-seater, the Bristol F2b 'Brisfit' proved to be an agile aircraft that was able to hold its own against opposing single-seat fighters. Versatile as a bomber, fighter and observation aircraft the Brisfit continued in military service until the 1930s.


This Microaces kit is now supplied 'as standard' with the most suitable Microaces motor/gearbox and propeller combination for the model.

So to complete the kit for radio controlled flight, all you need is an All In One (AIO) Receiver that's compatible with your transmitter.
Selecting the right receiver to complete your kit:

The Microaces AIO 5CH micro receiver (NOT INCLUDED)is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
DSM2/X Compat. S-FHSS Compat. FrSky D8 Compat. FrSky D16 Compat.

'Bomb's away!' (NOT INCLUDED)

The Bristol F.2b was originally designed as a bomber and, although it was much more successful as a fighter aircraft, it retained the capability to carry ordnance on three detachable racks on the underside of the lower wings.

We've 3D modeled the rack of four 25lb Cooper bombs and the more substantial Royal Laboratories 112lb HE bomb and rack that can be attached to any of the three points on the Brisfit to elevate the level of detail of this kit beyond anything available at this scale (and a good deal larger too).

The ordnance can be taken into the air too: the weight of the Cooper Bomb Rack is 1.8g and the RL 112lb Bomb and Rack is even lighter at only 1.2g. So the effect on flight performance is minimal.

Kit Content

NOW INCLUDES Brushed Motor/Gearbox PLUS with standard prop shaft
GWS 5030 Prop and rubber prop adapter
SHEET PARTS 2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet x 2
1mm printed & laser cut Depron flight surfaces sheet x 2
200 micron printed & laser cut polypropylene sheet x 2
polyester sticker sheet

LOOSE PARTS 0.8mm laser cut plywood motor mount
Two 30mm Ø rubber tires
Six noedymium magnets
50mm x 4mm Ø plastic tube
1mm x 0.4mm carbon fibre strips
1mm Ø carbon fibre rod
pre-shaped piano wire elevator & rudder control rods
3D printed fuel pump prop

Specification
Airframe Scale
Controls Rudder, Elevator, Throttle
Length 325mm / 12.8
Wingspan 500mm / 19.7"
Wing Area 7.00 sq dm / 108.5 sq in.
Flying Weight. 57.0g/1.8oz
Wing Load 7.61g/sq.dm / 2.49oz/sq.ft.
Recommended
Receiver
Microaces 5CH AIO Receiver - Not Included
Motor / G.Box* Microaces Micro Motor & Gearbox PLUS - Included
Prop* GWS 5030 - Included
Skill Level - Build Intermediate
Skill Level - Pilot Intermediate
Tools required Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers - not included
Adhesive Deluxe Materials Foam2Foam / Aliphatic glue-not included
Recommended Receiver - Microaces AIO 5 Channel Receiver (Not Included)
"