Engine Mount 09 cu.ins

Moulded in glass filled nylon, these mounts are rigid, accurate & extremely tough. The back of the mount is slotted horizontally & vertically to provide for the steerable fixed nose wheels. The motor is fitted using the self tap screws provided, after drilling pilot holes. This makes a vibration proof fitting.
The measurements between the bearers is 21mm.

Width between beams is 21.5 mm
Length of beams is 31 mm
Width of each beam is 8 mm
Distance between the centers of the top firewall mounting holes is 30mm
Distance between the centers of the lower firewall mounting holes is 15mm
Overall length of the mount is 38 mm
The Diameter of the fire wall bolt holes is 3.6 mm
Fixing bolts are not included but self tapping screws are supplied for fixing engine down
All Measurements are approximate