Program Setting: 1. Throttle range setup (full throttle and stop). 2. Turn on transmitter and set throttle to maximum position. 3. Connect battery to ESC. After approximately 2 seconds, the LED flashes rapidly, then 1 second after you will hear 2 beeps (1 KHZ tone) confirming the maximum throttle position has been set. If you hear 3 times long BEEP ——BEEP BEEP BEEP———BEEP BEEP ………… sound, it mean entering program setting status, First out-setting BEEP It mean - Auto 2-3LIPO , each cell 6V / 9V BEEP BEEP It mean - Auto Ni-Cd, each cell 0.9V BEEP BEEP BEEP It mean – Break setting BEEP BEEP BEEP BEEP It mean – return to first setting, as cycle. All of first setting will going cycle until you have choice entering second details program. If sound cycle get what you intend to program set, then you put throttle positive to low, at same time, the motor will making peak Voice for confirm, once you intend value of program faction being done, waiting 2 second, the motor will making a peak Voice for re-confirm, then you can put throttle back to low position for re-start running. Confirm Voice: 1. Longer Voice Beep , it mean Ni-cd / Ni-Mh protect 2. Shorter Voice Beep , it mean Li-Poly Protect Break Voice: The Default set is none of break function, if you want to turn on break faction, you have to get into program details and choice you want value of break, if you want to turn off break faction, you can simple get into program details and set throttle to low position, then waiting 2 second until motor peak voice confirm, it mean tune off break function. ** Notice, please make sure you brushless motor and propeller size are fitting correct, otherwise once break function being turn on and matching incorrect propeller size it might cause motor burn or ESC getting 110 degree tempture protect function earlier. Contact & Warranty Info The Alturn USA company is cover warranty for in year from date of purchase to be free from manufacturing and component defect, this warranty doesn’t cover abuse, beglect, or damage due to incorrect wiring, over voltage, or overloading, if you have any question or got any problems, or wish to repair or replacement that you can contact ours support tem directly. Alturn USA CO,.LTD. http://www.alturn-usa.com
Specification
ACS Under 30A Series of Brushless Speed Control Instruction MOS-FET30A ; Peak Amp 40A within 10 second Work Voltage: 4-10NIMH 2-3LIPO BEC Output : 3A Cut-off protect: Auto 2-3LIPO , per cell 6V / 9V Auto Ni-Cd / Ni-mh, per cell 0.8V Throttle safety , Throttle not correct position can not start running. Temp Protect, over 110degree start protect cut-off Lost signal protect, lost PWM signal Basic 8Mhz PWM control by TX signal
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
You have the right to cancel within 7 working days after the day you take receipt of goods. You must notify us within this time that you wish to cancel. You are required to take good care of the goods and return them to us at your own cost within 30 days. Your product must be complete, unused and in ‘as new’ condition (e.g. if you have opened the box to examine the product you must have done so without damaging or marking the product in any way). It should be returned with the original box, packing and accessories. If the returned item is in a condition which does not enable us to resell as new, we reserve the right to make a charge from any refund to cover this cost. We recommend that goods are returned by recorded or insured delivery. If you would like to phone our despatch department we can arrange to have the item(s) picked up. We will subtract the return cost from your refund. No refund will be provided for lost goods being returned to us, as this is the responsibility of the sender. We cannot cancel your purchase when: • The seal is broken on any software in the case of a simulator. Special Orders - If the goods were a special order that we do not have in stock and have had to order specially - If you cancel we reserve the right to charge a restocking fee of 10%. If we send a substitute without first checking that the substitute is acceptable then consumers are not expected to pay return carriage costs. These rights are in addition to those relating to faulty or misdescribed goods. If goods are returned as faulty, generally we will provide a replacement. If the item is of a ‘ready to go’ type model eg. Helicopter, plane, car etc. the item will be sent back to the supplier for a decision to be made in respect of a refund or replacement. Only then will a decision be made