The ST-Model Turbo Beaver is a 'go anywhere' sport-scale model with both wheels and floats included in the box for land or water use. With impressive manoeuvrability and a 1:1 power to weight ratio the Turbo beaver is well suited to smaller flying locations and can pull itself off the water with ease in float form.
This kit comes with large 'bush' style wheels and landing legs for land based use but there is also a foam float set in the box for water use. The moulded EPO foam floats are stepped for an easy take-off and there are steerable water rudders on the back of each one (linked to the rudder servo) for easy water based taxing. If you have never flown from water then this is perfect opportunity to bring a new element into your hobby.
The airframe itself is made from moulded EPO foam with carbon and plastic re-enforcement throughout for the ultimate balance of durability and low weight. The motor, ESC, servos are pre-installed ready for a Tx/Rx and battery of your choice. There are also bright LED lights pre-installed in the wing tips, a wing mounted landing light and a center fuselage light, perfect for those calm dusk evenings. The model is supplied pre-painted and decaled with lots of moulded plastic scale parts such as aerials, exhausts
The large wings produce a light wing loading and with the wing-fences and fowler flaps you can really slow it down during touch and go's or slow passes. The control response is crisp and positive inspiring confidence at a wide range of flying speeds.
Assembly should only take a couple of hours and like all ST Model aircraft, no glue is required!
• Foat set and large 'bush style' wheels included in the box! • Wing fences and fowler flaps for slow speed flight • Tough moulded EPO airframe • Scale 3-Blade propeller • Step-by-step printed instructions • Bright pre-installed LED tip, landing & center lights • No glue required to build!
Included in the Box • ST Beaver Airframe • Float Set • Wheel set • Printed Instructions
Required to Complete • Various hand tools • 5+ Channel 2.4GHz Radio set • 3S1P 11.1V 1800-2200mAh 30C Li-Po & charger (O-HE3S1P180030A or O-HE3S1P220030A recommended)
Specification
Lights: LED Tip, Landing & Center (Inc.)
Material: EPO Foam Propeller: 3-Blade 12x6" EP (Inc.)
Radio System: 5 Channel 2.4GHz (Req.) Connector: 'T' Style on ESC
Scale: 1:10 Wing Area: 21dm² (431 in²)
Wing Loading: 51.1 g/dm² (16.7 oz/ft²) with Floats (Approx) Wing Loading: 45.9 g/dm² (15.1 oz/ft²) with Wheels (Approx)
Speed Controller: 40A Brushless (Inc.) Electric Motor: Brushless Outrunner (Inc.)
LiPo: 3S1P 11.1V 1800-2200mAh 30C (Rec.)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
You have the right to cancel within 7 working days after the day you take receipt of goods. You must notify us within this time that you wish to cancel. You are required to take good care of the goods and return them to us at your own cost within 30 days. Your product must be complete, unused and in ‘as new’ condition (e.g. if you have opened the box to examine the product you must have done so without damaging or marking the product in any way). It should be returned with the original box, packing and accessories. If the returned item is in a condition which does not enable us to resell as new, we reserve the right to make a charge from any refund to cover this cost. We recommend that goods are returned by recorded or insured delivery. If you would like to phone our despatch department we can arrange to have the item(s) picked up. We will subtract the return cost from your refund. No refund will be provided for lost goods being returned to us, as this is the responsibility of the sender. We cannot cancel your purchase when: • The seal is broken on any software in the case of a simulator. Special Orders - If the goods were a special order that we do not have in stock and have had to order specially - If you cancel we reserve the right to charge a restocking fee of 10%. If we send a substitute without first checking that the substitute is acceptable then consumers are not expected to pay return carriage costs. These rights are in addition to those relating to faulty or misdescribed goods. If goods are returned as faulty, generally we will provide a replacement. If the item is of a ‘ready to go’ type model eg. Helicopter, plane, car etc. the item will be sent back to the supplier for a decision to be made in respect of a refund or replacement. Only then will a decision be made